V34 Optical Grade Hybrid Compound
Engineered specifically for scratch-resistant and ceramic clear coats
Dynamic finish capabilities allowing the highest level of cutting power
Removes 1500-2000 grit sanding scratches
Designed for use with DA and rotary polishers
Optical grade micro abrasive technology for enhanced clarity and precision
Formulated using no silicone or fillers
Also available in 16oz size
The V34 Optical Grade Hybrid Compound is the first optical grade hybrid compound that is designed with precision technology to eliminate heavy paint defects and imperfections. The V34 is formulated utilizing optical grade micro abrasive technology that removes paint imperfections and defects with the clarity and precision that perfectionists demand. The V34 is an ultra-refined hybrid compound engineered to remove heavy paint damage while leaving the finish ready for the final polishing stage. Formulated specifically for extended work time, V34 hybrid compound is the first water-based OEM approved compound capable of removing heavy paint imperfections and defects permanently. The V34 delivers perfect results without filling in or covering up. Optical grade micro abrasives rapidly eliminate imperfections and remove 1500-2000 grit sanding scratches and swirls. V34 delivers a perfect finish with fewer passes and is equally effective on both ceramic finishes and conventional clear coats. V34 delivers the finest results with unmatched optical clarity. Designed to function without oils, silicon’s or fillers, V34 maximizes efficiency by optimizing work time to deliver perfect results.
Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Spread on speed setting 1. Set DA machine to speed setting 5-6. Using moderate pressure, work area in 2-3 passes until compound becomes clear. Follow with light pressure to finish. Remove residue with clean microfiber cloth. Follow with V36 optical grade cutting polish for perfect clarity.
Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Pad Conditioner. Set machine to between 1000-1500 rpms to spread product. Work in 2’ x 2’ section at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes until compound becomes clear. For final pass adjust speed setting to between 1200-1800 rpms. Work until optical clarity is achieved. Remove residue with clean microfiber cloth. Follow with V36 optical grade cutting polish for perfect clarity.