V38 Optical Final Polish-Optical Grade Final Polish (16 OZ)
Ultra refined finishing polish
Removes light paint defects
Delivers perfect results permanently without filling in or covering up
Removes 2500-3000 grit sanding scratches, swirls and holograms
Can use with a rotary or a DA machine
The V38 Optical Final Polish is the first optical grade super polish that is designed for perfectionists searching for the deepest level of shine, clarity and depth. V38 is an ultra refined finished polish that was developed to achieve the finest level of optical clarity. V38 is powder-free and dust-free and is formulated for extended work time. V38 super polish is the first water-based OEM approved polish that is capable of removing light paint defects by delivering perfect results permanently without filling in or covering up. Optical grade micro abrasives rapidly eliminate imperfections and remove 2500-3000 grit sanding scratches, swirls and holograms. V38 delivers a perfect finish with fewer passes and is equally effective on ceramic finishes and conventional clear coats. V38 delivers the finest results with unmatched optical clarity. V38 is designed to function without oils, silicone or fillers, V38 maximizes efficiency by optimizing work time to deliver perfect results. VOC compliant and body shop safe for any paint shop environment. V38 is specifically engineered to work with water-based paints and ceramic clear coats.
How To Use:
Work on cool surface. Shake Well. Always work 2’ x 2’ section at a time.
Apply 4-5 drops to desired pad. Spread on speed setting 1. Set DA machine to 5-6. Using moderate pressure work area in 2-3 passes till polish becomes clear. Follow with light pressure to finish. Remove residue with clean microfiber cloth.
Apply 4-5 drops to desired pad. Prime pad with Chemical Guys Quick Detail Spray. Set machine to between 1000-1500 rpms to spread product. Work 2’x2’ area at a time. Using just the weight of the machine (no pressure) work area in 3-4 passes till polish becomes clear. For final pass adjust speed setting to between 1500-1800 rpms. Work till optical clarity is achieved. Remove residue with clean microfiber cloth.